New Product!---MAN Euro6 Truck Adblue Emulator is On sale at uobdii.com

MAN Euro6 Truck Adblue Emulator

article comes from: http://blog.uobdii.com/new-man-euro6-truck-adblue-emulator-is-on-sale-at-uobdii-com/

Here disclose the detailed information about the newly coming product— AdBlue Emulator for MAN Euro6 Truck.

Image:

Man EURO6 AdBlue Emulator Disable system:
– AdxBlue system (Fully)–> YES
– AdxBlue NOX sensor –> YES
– DPF system –> YES
– DPF temperature sensors –> YES
– DPF regeneration – >YES

After installing Euro6 emulator, you can remove:
–DPF sensors –> YES
–NOx sensor –> YES (only in DAF don’t remove first NOx sensor !!!)
–Adblue temp sensor (s) –> YES
–Adblue pump –> YES
–Adblue level sensor –> YES
–Adblue ECU –> YES

Kindly note: It is possible to disable AdxBlue system by installing an AdxBlue emulator (programmable device) into the vehicle. You can switch it on/off anytime.

How to use EURO6 AdBlue Emulators?
Emulator Man Euro 6 does not need to be learned. You install emulator under the metal cover of AdBlue Pump on the right side behind the cab, and disconnect plug from AdBlue Pump and connect emulator.

Next, you need to remove the fuses:

F894(Multisensor In AdBlue tank)

F738 (+30 Signal of AdBlue pump)

F1084 (NOx sensor Upstream)

Fuse F737 is now fuse of emulator.

Fuse F1109 is the fuse of NOx sensor Downstream and A1191 mufler temperature sensor. This sensor needs to work correctly for DPF regeneration.

Finally, remove Power from NOx downstream sensor. There are two ways options, one is to cut pin 1 in NOx sensor plug, the other way (better) is toremove pin 10 in X3212 plug. This plug is visible on rear of engine on the right side. This is TE plug (16 pin) with yellow key.

What you will get in the package?

1pc x Man EURO6 AdBlue Emulator